I also observed that, in the parts of the project where there is overlap of images, effects or subtitles, the GPU goes to 100%. When it's just video, the GPU no longer enters, and the processor assumes.

I just installed a new CPU (Ryzen 7700) and when exporting I noticed it is not using the CPU at all, and instead is using 100% of the integrated GPU, even though I've specifically disabled hardware acceleration in options. Is there an option I can change to run everything exclusively on the CPU? 

This problem is not fixed in version 26.1.0.238 that Corel released this week.

In the last few decades, all the music we hear, in the studio mastering phase, goes through a compressor.

The audio of this show was born with a problem. The main camera sound came from the mixer console, and the support camera sound came from the microphone itself. However, the console sound burst into the main camera. For this reason, in editing, the sounds of the two cameras were mixed, and what prevailed most was the support camera, leaving the ...

Considering that it was an event recorded on S-VHS in 2005, and previously edited and rendered in 2008, I considered the result to be very good. In addition to equalizing, increasing the mid-high, high frequencies, increasing the gain and compressing the excess from -1dB, I also applied a low cut at 40Hz. Improving concert sound is never ...

A R&R show.

After equalizing, apply general gain and cut through the pre-established threshold, the excess that I don't want to appear in the audio.

Follow...

Hi, I need to work compression on an audio on the PS26U. The Ratio setting is normally (2:1 ; 4:1 ; etc). On the PS26U this adjustment appears in numbers from 1 to 100. Does anyone know how I would adjust a 2:1 compression with these numbers. Would it be 2 or 50? Thanks.