Forums
in > Search
Welcome to Pinnacle Systems - Forums Sign in | Join | Help

Studio 15 capture from DVC100 - no video in preview

Last post 11-22-2016, 21:36 by R_Vera. 10 replies.
Sort Posts: Previous Next
  •  11-15-2016, 22:00 725523

    Studio 15 capture from DVC100 - no video in preview

    Hello all

    Running Studio HD 15 on Windows 7 64-bit capturing from Dazzle DVC100. Open Import window and start VCR connected with composite video to DVC100. 

    Get sound but no video. If I select Start Capture, I still get sound but no video in Preview window.Preview window black.

    If I then stop capture and check the saved video then I have both video and sound. I have updated DVC100 drivers. Can anyone please advise ?
    Packard Bell iXtreme X6620 UK


    Intel Core 2 Quad Q8300 @ 2.5GHz
    6 GBytes DDR2 RAM
    NVIDIA GeForce GTX 750 Ti, 2Gb RAM
    Windows 7 Pro, 64-bit
    MoBo Packard Bell EG43M
    Direct X 11

  •  11-15-2016, 22:19 725525 in reply to 725523

    Re:Studio 15 capture from DVC100 - no video in preview

    Try to capture using AM Capture. Is preview ok ?
  •  11-16-2016, 14:36 725552 in reply to 725525

    Re: Re:Studio 15 capture from DVC100 - no video in preview

    Yes I have tried AMCap.

    Open AMCap and start tape playing. Video and sound are in the preview window. Select Capture and after 2 or 3 seconds I get the message
    An error has occurred during capture.
    No time stamp has been set for this sample. (0x80040249)
    A 64K file is produced which will not play in VLC or PotPlayer.

    I have contacted the  program owner and am awaiting a reply.

     

  •  11-16-2016, 14:45 725553 in reply to 725552

    Re: Re:Studio 15 capture from DVC100 - no video in preview

    Also, when I stop capturing in Pinnacle, then I get sound and video in Edit. It seems that it is just the capture preview window I get no video.

    The produced file plays ok.

     

  •  11-16-2016, 17:15 725566 in reply to 725553

    Re: Re:Studio 15 capture from DVC100 - no video in preview

    Before capturing in AM Capture do you see the video in the preview window ?
  •  11-16-2016, 17:20 725569 in reply to 725566

    Re: Re:Studio 15 capture from DVC100 - no video in preview

    Yes.

    However, I am trying  AVS video recorder which so far seems to be capturing successfully.

     

  •  11-18-2016, 13:00 725718 in reply to 725569

    Re: Re:Studio 15 capture from DVC100 - no video in preview

    Following on from my last post.

    Studio 15 started playing up, so I thought, no problem, I can capture in AVS Video Recorder, and uninstalled Studio.

    Unfortunately this also uninstalled the DVC100 drivers. Again, no problem, just reinstall the drivers from using the saved Pinnacle_Video_Driver_64bit.exe.

    Ran this program and  received the message The wizard was interrupted before Pinnacle Video Driver could be completely installed.

    Your system has been modified. To complete installation at another time, please run setup again.

     Tried 6 or 7 times and received the same message each time.

    OK, then, reinstall Studio 15. Did this, and Device Manager shows  Other Devices - DVC100 and Unknown device,both with yellow triangles, in Sound,

    Video and Game controllers  I have a DVC100 entry which I am told is  working properly.

    Properties show no drivers installed.

    Update drivers - Browse pc - message Windows was unable to install your DVC100. Windows could not find software for your device.

    Update drivers - Search online for software - message Windows could not find driver software for your device.

    In both cases I was advised to visit manufacturer for drivers. This of course led to  Pinnacle_Video_Driver_64bit.exe again.

    In Sound,Video and Game controllers  I have a DVC100 entry which I am told is  working properly.

    I have tried everything I have found in these forums with no success. I did see that Pinnacle Marvin Bus is also needed for the device.

    I have  MarvinBus64.sys in c:\Windows\system32\drivers but nothing in Device Manager.

    I have uninstalled and reinstalled 3 or 4 times, and get the same result every time.

    Can anyone please help ? Why did it work perfectly before uninstall/reinstall and not now ?

    Packard Bell iXtreme X6620 UK
    Intel Core 2 Quad Q8300 @ 2.5GHz
    6 GBytes DDR2 RAM
    NVIDIA GeForce GTX 750 Ti, 2Gb RAM
    Windows 7 Pro, 64-bit
    MoBo Packard Bell EG43M
    Direct X 11

     

     

     

  •  11-20-2016, 20:47 725887 in reply to 725718

    Cannot install drivers - following Studio 15 capture from DVC100 - no video in preview

    I have been investigating further. I have found an installation log
    for the driver installation which states that it failed with a 1603
    error.
    Searching for this gives the following:

    Error 1603 issues

    Error 1603 is an error caused in Windows 7 while trying to install a
    Microsoft Windows Installer package. When the error is caused, it
    prompts the user with an error message and an ‘OK’ button. When the
    user acknowledges the error message the installation aborts and rolls
    back. This means that the user can no longer be able to install the
    package until the Error 1603 is fixed.
    Reasons

    The reasons behind error 1603 are several. It can occur if you are
    trying to install it into an encrypted folder. It can also appear if
    you are trying to install on a drive which is actually a
    substitute/temporary drive. Windows Installer is installed under the
    SYSTEM account. If the SYSTEM account doesn’t have Read/Write
    permissions over the folder to which you are installing, the "Error
    1603" will occur.
    Remedial measures

    "Error 1603" can be resolved in different ways depending on the
    reasons behind the error. If you are trying to install it in an
    encrypted folder, try installing it in a non-encrypted folder. Also
    make sure that the folder is not in a substitute drive. To modify
    permission rights, open ‘My Computer’ and right click on the drive to
    which you want to install. Select ‘Properties’ and then select
    ‘Security’ tab. Verify that the SYSTEM account is selected. If not,
    click ‘Add’ and add the SYSTEM account. Now go to ‘Permissions’ tab
    and select ‘Full Control’ under ‘Allow. Click ‘OK’ and close the
    dialog boxes. This will set the permission levels for SYSTEM account
    and allows you to install it in any folder under the selected drive.

    I do not have an encrypted folder or substitute drive.

    Can anyone give me advice ?

     

  •  11-20-2016, 22:30 725888 in reply to 725887

    Re:Cannot install drivers - following Studio 15 capture from DVC100 - no video in preview

    I've merged your last message with your original thread.

    Please don't post in several threads for the same topic.  Smile

  •  11-22-2016, 19:17 726009 in reply to 725888

    Re: Re:Cannot install drivers - following Studio 15 capture from DVC100 - no video in preview

    Apologies, but since this post bears no relationship to my previous ones, ie. cannot install drivers, not lack of video in preview,

    nothing to do with Studio, purely DVC100 driver installation, I thought that it warranted a different title.

     

  •  11-22-2016, 21:36 726025 in reply to 725523

    Re: Studio 15 capture from DVC100 - no video in preview

    scbs29:

    Hello all

    Running Studio HD 15 on Windows 7 64-bit capturing from Dazzle DVC100. Open Import window and start VCR connected with composite video to DVC100. 

    Get sound but no video. If I select Start Capture, I still get sound but no video in Preview window.Preview window black.

    If I then stop capture and check the saved video then I have both video and sound. I have updated DVC100 drivers. Can anyone please advise ?
    Packard Bell iXtreme X6620 UK


    Intel Core 2 Quad Q8300 @ 2.5GHz
    6 GBytes DDR2 RAM
    NVIDIA GeForce GTX 750 Ti, 2Gb RAM
    Windows 7 Pro, 64-bit
    MoBo Packard Bell EG43M
    Direct X 11

    I think it might be the driver for your graphic card. Check your transitions if they are working properly. If missing some of them then you need to roll back your graphics card driver (314.22) and do not install any updates for your driver unless you are a gamer and need to install it.

View as RSS news feed in XML
Copyright © 2012 Corel, Inc.. Terms of Use | Privacy Policy