anyone encounter the DRIVER_IRQL_NOT_LESS_OR_EQUAL  crash in windows 7 using PCI-510?
Althought the latest driver from http://cdn.pinnaclesys.com/SupportFiles/Hardware_Installer/readmeHW10.htm has installed

anyone could help?

You may want to check this site out.

http://www.windowsanswers.net/articles/fix-blue-screen?tid=driverirqlnotlessorequal&gclid=CJ6nh-nqy74CFStk7AodbCgAtA

Warning: any download you may do in this sight might produce some sort of spam. You can open this sight but be careful with instructions to download something.

Thx.

anyone encountered similar problem? 

I've not seen it on a USB500, which uses the same drivers, on a W7 64 bit machine.

anyone else has similar issue? urgent

any help!

I assume you've worked through this:

http://corel.force.com/pinnacle/articles/en_US/Master_Article/Guide-to-troubleshooting-USB-capture-hardware-installations-with-Studio?&source=kba ?

i am using the PCI not the USB one

From the Pinnacle driver updates

http://cdn.pinnaclesys.com/SupportFiles/Hardware_Installer/readmeHW10.htm

At the bottom is a note

Important Note: MovieBoard 500-PCI/700PCI has an issue on Windows 64 bit systems when the computer has 2GB or more system RAM. In this case Studio will crash during capture. For this reason other capture devices are recommended on most Windows 64 bit systems.

 

Sorry, I'm going blind - I thought you wrote USB

Yes, the PCI drivers don't work in 64 bit unless you have a stupidly low amount of RAM - and no, there are no plans to fix the issue

i am using 32bit window

Is the card in Slot 1? Are there other PCI cards installed? In the past there were sometime issues with PCI bus clashes. If you can, try moving the card to another slot.

i tested to use another slot, but problem still exist.
I also tested to try another PC, same problem