Hello.
The next problem is the machine where I renewed before editing them with a new attachment features:
Dell Precision WorkStation T5400
DUAL INTEL XEON E5420 (2.50GHZ)
QUAD CHANNEL 4GB DDR2 667 FBD MEMORY
3x 500 GB HD
DUAL 512MB ATI FireGL V7600
Sound Blaster X-FI XTREME MUSIC CARD
S.O. WINDOWS XP SP3 - all updates + DirectX 10
And the version of the Avid Liquid 7.2.1, the machine has all the updated drivers for today ...
Well I said, smoothly install the cassette fully configure a
specific component and a D9 JVC HDV by firewire perfectly, I open the
capture module, the perfect control video, I captured and did not give
any error but when the unemployment capture, send the captured video
files to the destination is reached and the problem appears with the
video and an X if you look at the properties it says "No media found"
When the hard disks are configured in Control Panel.
And I say, let's try another form of capture, this time by the
EZCapture (easy to catch) and this module does not give any problem,
both for HD components. I see the video in the timeline perfectly.
Try the missing module specifically capture the intake module and
this is all going well but as with the first module to capture, when
the show ends to catch with a miniature cross.
The problem is that I need to run the three modules, depends on the work because we use a capture module difetente.
What could be because the problem? Can it be that windows is
installed wrong? I think that is no problem of incompatibility as a
module for capturing work well?
The machine worked perfectly earlier.
Thank you very much everybody.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hola.
El problema es el siguiente he renovado la maquina donde antes editaba por una nueva les adjunto las caracteristicas:
Dell Precision WorkStation T5400
DUAL INTEL XEON E5420 (2.50GHZ)
4GB DDR2 667 QUAD CHANNEL FBD MEMORY
3x 500 GB HD
DUAL 512MB ATI FIREGL V7600
SOUND BLASTER X-FI XTREME MUSIC CARD
S.O. WINDOWS XP SP3 -- con todas las actualizaciones + DirectX 10
Y la version del Avid Liquid es la 7.2.1, la maquina tiene todos los drivers actualizados a dia de hoy...
Pues os comento, la instalo sin problemas configuro los magnetoscopios perfectamente en concreto un D9 por componentes y un HDV de JVC por firewire perfectamente, abro el modulo de captura, controlo perfectamente el magnetoscopio, doy a capturar y no da error ninguno pero cuando paro la captura, manda el video capturado a las carpetas de destino y hay llega el problema el video aparece con un aspa y si le miro las propiedades me dice que "No hay medios encontrados" Cuando los discos duros estan perfectamente configurados en panel de control.
Y me digo, vamos a probar con otro modulo de captura, esta vez por el EZCapture (captura facil) y por este modulo no da ningun problema, tanto por HD como por componentes. El video lo veo en la timeline perfectamente.
Pruebo el modulo que falta de captura en concreto el de ingesta y por este modulo va todo bien pero pasa lo mismo que con el primer modulo de captura, que cuando termina de capturar muestra la miniatura con un aspa.
El problema es que necesito que funcionen los tres modulos, porque depende del trabajo usamos un modulo de captura difetente.
¿A que podria ser debido el problema? ¿puede ser que windows se haya instalado mal? ¿creo que no es problema de incompatibilidad ya que un modulo de captura funciona bien?
La maquina anterior funcionaba perfectamente.
Muchas gracias a todos.