Studio - Capture

Re: Dazzle - 1st time user - audio lags video

Marc P. — Wed, 05 Aug 2009 00:11:22 GMT

sammydad2:

Hi,

Somewhat of a pat answer, but using USB2 with NEC based chipset seems to help quite a bit with the USB2 capture devices.... This was seen back in 2005 with studio 9 and MANY people seemed to have much better results once the had installed a NEC based USB2 adapter in their pc. I dont recall if anybody back then was able to find out just why the NEC adapters did so much a better job at capturing than the VIA (or other motherboard based USB2 chipsets) at that time. Perhaps newer motherboard based USB2 chips are better...or maybe not.

I use an NEC based USB2 adapter and mine captures quite nicely....but I did have to get rid of the emStream.sys driver crash error....

SD

Thanks again for sharing your experience with this matter. What motherboard are you using again?

Re: Dazzle - 1st time user - audio lags video

sammydad2 — Mon, 03 Aug 2009 04:54:42 GMT

Hi,

Somewhat of a pat answer, but using USB2 with NEC based chipset seems to help quite a bit with the USB2 capture devices.... This was seen back in 2005 with studio 9 and MANY people seemed to have much better results once the had installed a NEC based USB2 adapter in their pc. I dont recall if anybody back then was able to find out just why the NEC adapters did so much a better job at capturing than the VIA (or other motherboard based USB2 chipsets) at that time. Perhaps newer motherboard based USB2 chips are better...or maybe not.

I use an NEC based USB2 adapter and mine captures quite nicely....but I did have to get rid of the emStream.sys driver crash error....

Re: Dazzle - 1st time user - audio lags video

Marc P. — Thu, 30 Jul 2009 21:24:49 GMT

pjlib:
I purchased a Dazzle DVD Recorder on July 29,2009 in New Zealand and encountered the same problems as jblair. I followed the clean boot instructions and it solved the problem. Thanks Don.

Thanks for sharing this with us.

Re: Dazzle - 1st time user - audio lags video

cuartetto — Thu, 30 Jul 2009 13:43:30 GMT

Re: Dazzle - 1st time user - audio lags video

pjlib — Thu, 30 Jul 2009 07:27:03 GMT

I purchased a Dazzle DVD Recorder on July 29,2009 in New Zealand and encountered the same problems as jblair. I followed the clean boot instructions and it solved the problem. Thanks Don.

Re: Dazzle - 1st time user - audio lags video

Marc P. — Wed, 01 Jul 2009 23:26:40 GMT

Yes that is true, thanks Don. Please follow the link from Don's post. Let us know if you need more help.

Re: Dazzle - 1st time user - audio lags video

cuartetto — Wed, 01 Jul 2009 19:00:46 GMT

A reboot is not the same as a clean boot. Here's a link to a Micro Soft Knowledge base article that describes how to do a clean boot. click here

Don

Re: Dazzle - 1st time user - audio lags video

jblair — Wed, 01 Jul 2009 15:16:44 GMT

I've rebooted at least 20 times, not to mention having had the computer turned off for hours.

Nothing has helped.

Re: Dazzle - 1st time user - audio lags video

Marc P. — Tue, 30 Jun 2009 06:48:44 GMT

Try a clean boot. This should sqeeze a bit more performance on your machine.

Dazzle - 1st time user - audio lags video

jblair — Sun, 28 Jun 2009 14:04:12 GMT

Hi, I need some help. I purchased a Dazzle DVD recorder to move my VHS tapes
from tape to DVD. While the Pinnacle "Instant DVD Recorder" software appears
to be pretty simple to use, I'm not having any luck.

Problem:

The first time I tried to do this, I burned a DVD with about 10 minutes of video
capture. When I played back the DVD that audio was over 12 seconds behind the
video. So I decided to copy from VHS to my hard drive while I checked the various
features in the Pinnacle program. Then check the video. Figuring once I get a good
copy of 3 to 10 minutes from tape, I'll try a hole movie. Then after I've captured the
video, I plan on coping it to dvd. But so far I have not gotten the audio to sync with the
video.

System Configuration:
My system is an emachine T2542 with an Intel Celeron processor at 2.5 GHZ.
I have upgraded the memory to 1.5 GB of ram and upgraded the HD to a 150GB
drive with about 90GB free space and a swap(page) file set to a fixed 1.5GB.
The computer appears to have an Intel 82845G/GL/GE/PE/CV Graphics Controller
with 64MB video ram (DirectX 9.0c (4.09.0000.0904) set to 1024x768.

The Dazzle unit I purchased is White - DVC 100 rev 1.1.

I'm running an upgrade of the OS to XP Pro (32bit) SP3. I'm using a Toshiba Model
W-603 VHS VCR to play back the VHS tapes and composite video cables connected
from the line-out plugs into the Dazzle, and the Dazzle unit plugged into a USB Port
on my computer.

What I've tried:

I purchased the Dazzle 2 days ago (Thur. 6/25/09). It came with Pinnacle
2.5.102.0. After I had trouble recording with it, I did a live chat with
Pinnacle Customer support. The told me to do:

1. Move the Dazzle from my USB hub and connect it directly to a USB port on my
computer. Then Reboot. I did that - No change.

2. They told me to download the latest updates to the Pinnacle software. I did,
and am now running version 2.6.116.0 No change.

3. The instructed me to return the unit and get another one. I did.

After installing the new unit, I have the same problem with the new unit. After capturing
the video & audio for a few minutes, and playing it back, the audio starts to lag the video
from after about 2 seconds. At about 4 minutes into the play back, the audio is over 60 behind the video.

4. Chatted with Pinnacle again today (6/28/09). The told me to unload the USB
drivers and get new ones (PCLEUSB2x32.exe). I did. Then I disconnected the
Dazzle unit, loaded them, rebooted, reconnected the Dazzle and tried to capture
5 minutes of video from a VHS tape. The audio still lags the video after about
2 seconds of play back.

5. They asked me to remove and reload the main program which I did to no avail.

In trying to figure out the problem, I've turned off my antivirus realtime protection
program, disabled my wireless network card, and had NO applications running but
Pinnacle. None of this has made any difference.

This is the only computer I have so I haven't tried to load the software and connect
the hardware to a different computer.