Studio - Capture

Re: Firewire loses connection during capture - Studio 11 and Studio 12

Marc P. — Thu, 02 Jul 2009 02:41:21 GMT

oklupie:
You guys are my heroes!!! I love a simple fix! I plugged it in to the back panel and it seems to be working fine. WooHoo!!!!!!

Thanks for the update.

Re: Firewire loses connection during capture - Studio 11 and Studio 12

colour — Thu, 02 Jul 2009 00:46:31 GMT

- And don't forget to turn off your Cam BEFORE you disconnect the Firewire cable. Otherwise you could fry either your Cam's Firewire or PC's Firewire, or both.

Re: Firewire loses connection during capture - Studio 11 and Studio 12

oklupie — Thu, 02 Jul 2009 00:31:42 GMT

You guys are my heroes!!! I love a simple fix! I plugged it in to the back panel and it seems to be working fine. WooHoo!!!!!!

Re: Firewire loses connection during capture - Studio 11 and Studio 12

Marc P. — Wed, 01 Jul 2009 23:27:45 GMT

colour:
oklupie:

While capturing, it runs fine for a little while then you hear the sound that tells when you add or take away a peripheral device from your computer.

It stops the capture and immediately the sound happens again to show that it found the camera again. It just keeps losing and finding the connection. Is this a problem with my computer or something I need to adjust within Studio?
Initial thought - sounds as though the Firewire data signal that controls your Cam is being interrupted due possibly to a defective Firewire cable.

1) Are you runing Cam from (a weak) battery or Mains supply?

2) Try Capturing with Windows Movieaker - Same Prob?

3) Can you try same cable on a friends PC?

4) Can you borrow a friends cable to try on your PC?.

ADDED - If your Firewire cable's connected to PC's Front Panel Firewire connector(s), try the Back Panel Connector(s).

.

To the OP,

Yes all great tips. Let us know how your tests turn out.

Re: Firewire loses connection during capture - Studio 11 and Studio 12

colour — Wed, 01 Jul 2009 19:12:06 GMT

oklupie:

While capturing, it runs fine for a little while then you hear the sound that tells when you add or take away a peripheral device from your computer.

It stops the capture and immediately the sound happens again to show that it found the camera again. It just keeps losing and finding the connection. Is this a problem with my computer or something I need to adjust within Studio?

Initial thought - sounds as though the Firewire signal that controls your Cam is being interrupted due possibly to a defective Firewire cable.

1) Are you runing Cam from (a weak) battery or Mains supply?

2) Try Capturing with Windows Movieaker - Same Prob?

3) Can you try same cable on a friends PC?

4) Can you borrow a friends cable to try on your PC?.

ADDED - If your Firewire cable's connected to PC's Front Panel Firewire connector(s), try the Back Panel Connector(s).

Added - It might be just a case of not pushing the Firewire Cable 6 pin Connector far enough into Pc's Connector. Those plugs are fairly long & a tight fit. The pin connectors are seated inside, a couple of cms or so, from the end of the plug..

Firewire loses connection during capture - Studio 11 and Studio 12

oklupie — Wed, 01 Jul 2009 14:28:34 GMT

While capturing, it runs fine for a little while then you hear the sound that tells when you add or take away a peripheral device from your computer.

It stops the capture and immediately the sound happens again to show that it found the camera again. It just keeps losing and finding the connection. Is this a problem with my computer or something I need to adjust within Studio?