Hi, I'm new here, please help...

  

I would like to make HD discs with menus, with Studio 22 Ultimate (Version 22.2.0.325 64 bit) . So far, I've made a DVD, it does it in unlimited size, but the 720x576 resolution isn't very nice on the TV.

My problem is that after exporting the frames when the creation asset goes, Studio simply crashes, closes. It does not send any error message. Blu ray patch is installed.

If I select Auto detect in Blu-ray Disc settings, Studio makes the Blu-ray disc at 720x576, while the video is 1440x1080. I don't understand where it takes the 720x576 resolution.

If I set any HD resolution, neither AVCHD, AVCHD2, nor Blu ray disc will do it, the problem described above will occur.

The 720x576 blu ray, on the other hand, is virtually the same quality as a DVD (a bit better, but not much) and, on the other hand, when playing a movie, it is like playing two parts at a time, two different movie parts flickering fast. I haven't even seen that before ...

 

Data for processed files:

Video: .m2ts format, H264 codec, 16000 kBit / s, 16 bit color depth, frame aspect 16: 9, 1440x1080 pixels, frames 25 fps interlacing,

Audio: Dolby Digital, 256 kBit / s, 48 ​​KHz, Stereo, resolution 16 bit, PCM format

 

Machine: Dell Vostro 3578, Intel Core i5 8250U, 8 GB RAM, WIN 10 Pro 64 bit, 1803 version, operating system party number 17134.706, DirectX 12

The machine has an 80 GB SSD for the system, Win and Studio. The files to be processed (videos, menus, sounds, etc.) are on the other 480 GB SSD, and I would also export the disk to be prepared here.

Do you have any idea what's wrong, what am I doing wrong?

 

Thanks 

Hi and welcome to this forum.

What if you ask just for a disk image creation ? Does it work ?

If yes, a simple workaround is to burn the image on a disk using an external tool. Imgburn is a free and easy tool for this.

Unfortunately, it doesn't work. When it finish scanning frames and begin to compile the disc (to export it to a folder or print to a disk), the Studio collapses. But this is only done with HD resolution, not at 720x576. No matter what structure I want to make a disc, It doesn't like HD resolution (as I noticed). Let's just say that I could try on the AVCHD disc, not on Blu ray, because I only have a DVD writer, no Blu ray. Otherwise, I tried using Phantom Drive, but it doesn't work either.

If your hardware acceleration setting is anything else than None, set it up to None in Control panel.

blocked hardware acceleration (turned on) but unfortunately the same ...

 

I took some screenshots about the errors. Can I insert a photo somehow here? 

Yes : http://forums.pinnaclesys.com/forums/thread/326384.aspx

Thank you!

Here are the screenshots: 

The first when studio export frames, it's OK 

 

 

The second, when exporting frames finished, it's OK

 

The third, when Studio try create disc image. At this point it always crashes

 

The fourth picture about a new error, it's when i tried create disc without hardware acceleration

 

 

I have found that exporting the timeline/project as an MTS file, then loading the exported MTS file in PS18 and placing it on the timeline, then making a disc in PS18 works the most reliable.

@ acsscott

Funny to see that when I enter "Disc internal error" in the search field of the forum, the 2nd answer I get is with PS18 !   

http://forums.pinnaclesys.com/search/SearchResults.aspx?q=disc+internal+error&o=DateDescending

@ harmati

I'm surprised. Between screenshot #2 and 3, export progress bar jumps from 16% to 33% ?

You know how it goes... Ha ha...

Yes, but nothing happens, and no files are downloaded to the HDD. The Disc export folder contains 20-30 GB of data, but does not put the disc together. I repeat, only do this if I want to do an HD disc. Could it be a problem with the video card or some configuration?

What is your hardware acceleration setting ?

None.

But when it was on, Studio made the same error... only faster.   :D

 

 

It s not On or Off.

It s Intel, Cuda or None. 

 

Your processor supports encoding.  Have you tried setting it to Intel?

What FAT system is on the destination drive? 

yes, I know, I wrote inaccurately.

I tried it with Intel, and with cuda, too, and i tried with none. Did not work

 

 

The destination drive is NTFS.

Could it be the problem? 

No it can t.

Have you tried using a third party program to burn your disc (Nero, Imageburn, etc).

He can t because even the image disk fails to export in his PS22.

Are you still using Windows 10 1803 version. You may want to update it to version 1809 (version 1903 should be released pretty soon too).

If you want to update your W10 make sure you do a backup just in case.