in > Search
Welcome to Pinnacle Systems - Forums Sign in | Join | Help

Pinnacle Liquid Edition 6.1

Last post 06-01-2013, 18:26 by LewS. 10 replies.
Sort Posts: Previous Next
  •  05-24-2013, 12:40 593691

    Pinnacle Liquid Edition 6.1

    Ladies and Gentlemen,
    After installing the application on the operating system Windows XP, SP 3, by entering the original serial number. JADQI-...... (a total of 25 letters) I get only displayed a demo version, see Figure 9381 program mask). Also located in the right preview window Pinnacle symbol that can not be shut off or remove. In Windows Start menu I have no way to enter an activation code. Also not also help if the program is started
    When installing the program, no activation dialog appears.

    Can it be, if you have tried several times unsuccessfully try installing the program to automatically block the Prgramms be done?

    An activation code from the previous owner I have. An online input on what is installed has failed.

    A product registration I made with Pinnacle. It was communicated to me an 8-digit ID.
    For a message as I can use the program without having to remove and Pinnacle emblem, I'd be much obliged.
    First, thanks for your efforts.
    Sincerely yours

  •  05-24-2013, 14:16 593697 in reply to 593691

    Re: Pinnacle Liquid Edition 6.1


    For some reason the option is missing in Liquid after going into demo mode.  Open the Easy FX editor from the XP Start menu (Hollywood FX)< and use the option "Enter activation key" in this program. Enter your Liquid 7 activation key and restart Liquid. Liquid should now be out of demo mode.
  •  05-25-2013, 10:51 593741 in reply to 593697

    AW: Re: Pinnacle Liquid Edition 6.1

    Dear Mr. LewS,

    first thank you for your quick response. On 08/05/2013 I can register the software at Pinnacle. As confirmation, I have an ID number for the custoner care. receive. As previously announced, I can during installation (Foto-Nr. 9391) only entered the data shown (the last 5 digits of the serial number. Because I changed the sending.

    Via Start / Windows I can enter under "Enter Your Plus or PRO Serial Number" (Foto-Nr. 9389). It is named after the aforementioned Ser. demand and also confirmed (photo 9388).

    Under Windows / Start Menu I have also no possibility of data entry.

    There is the activation of Hollywood following note:

    "Important notes about Hollywood FX 5.5.

    No longer needed * Permanent Keycode
    Registration of Hollywood FX to obtain a permanent key code is
    no longer necessary, although we recommend registering urgent, especially since you
    so that others also always get the latest update information.

    * Club Hollywood
    Club Hollywood has been replaced by the online store of Pinnacle. If you are under
    Hollywood FX click on the button with the 'key symbol' (or the
    Menu item 'purchase upgrades and add-ons' Enable under the 'Help' menu will
    They headed to the online store of Pinnacle where you lose no time your
    Activation keys for unlocking effect of packages and additional features
    can acquire.

    * Hardware acceleration
    If you are under studio edition or the 'hardware function Beschleunigung'nutzen want
    you must have a graphics card with at least 128 MB of memory.

    * The fastest technical support please "

    As already mentioned, I need access to support. My program is officially niht longer listed for assistance. Nevertheless, it must be possible to obtain a new activation code.

    The web pages of Pinnacles in Germany are as good as off. Therefore urgently needed is access to the support for you to get an activation code. The activation code I got from the previous owner of the software that works NICT more, because the computer has also changed.

    Under what address (e-mail) I can get access to the Pinnacle support in the United States.

    For your efforts I am very grateful in advance.

    With regards freunlichen

  •  05-25-2013, 10:57 593742 in reply to 593741

    AW: Re: Pinnacle Liquid Edition 6.1

  •  05-25-2013, 11:54 593750 in reply to 593742

    AW: Re: Pinnacle Liquid Edition 6.1

  •  05-25-2013, 13:54 593760 in reply to 593750

    Re: AW: Re: Pinnacle Liquid Edition 6.1

    Give this a shot and good luck:

    Link to Activation Key Generator

    If you get a new activation key, go to the XP Start menu and under Hollywood FX open the Easy FX Editor and under help you will see a section to enter the activation key. This is not the serial number. You will need that also and the Passport number from the Liquid About screen in the Liquid Help menu.

    You will need the email address that the original owner used when he registered the product. The link to change the email address is broken. If you are successful, the new key will be shown on screen and not emailed despite what the screen says. 

    As Pinnacle is now owned by Corel and Liquid has been discontinued for many years there is no one I know to contact so if this does not work, or you cannot get the original email address, you are probably out of luck.

    Again, good luck.



  •  05-26-2013, 6:32 593788 in reply to 593760

    AW: Re: AW: Re: Pinnacle Liquid Edition 6.1

    Dear Mr.LewS,

    Thank you for your continued help.
    Do you entering the activation key using the two annexed photos? I have changed because of the publication of the specified number.
    What do you mean by the email address of the original owner. Do I need to install the software under the name and e-mail address of the previous owner, because a change in my name is no longer possible?

    About answering my question I would appreciate it.

    Sincerely yours

    Hämmerlin from Germany

  •  05-26-2013, 6:33 593789 in reply to 593788

    AW: Re: AW: Re: Pinnacle Liquid Edition 6.1

    Attachment: Img_9393.jpg

  •  05-26-2013, 11:55 593797 in reply to 593789

    Re: AW: Re: AW: Re: Pinnacle Liquid Edition 6.1

    Yes, enter the activation key in that box if you have it.

    In order to generate a new activation key, when you go to that link I sent earlier, you must have the original email address that was used to register the product back when it was originally bought. If you do not have that email address, you can't generate a new key. If you re-registered it under your name, you can try the email address you used but I suspect it will not work and you will need the original address. You can't lose anything by trying however.


  •  06-01-2013, 16:05 594423 in reply to 593797

    AW: Re: AW: Re: AW: Re: Pinnacle Liquid Edition 6.1

    Dear Mr. LewS,

    Unfortunately, I have still not found the solution for activating the program.
    I think Pinnacle in the U.S. could help me with the activation.
    For creating an activation code I have the Passport no. According to my findings, the program is not yet supported on my name (email address). The previous owner has deposited with the Pinnacle e-mail address is no longer, so that a newly generated activation code arrives and can not be read.

    Pinnacle should therefore rewrite the Serial Number of the liquid on my e-mail address. I will need the contact address (e-mail) of Pinnacle at you in the USA.

    I would appreciate if you could tell me this.

    I thank you for your efforts in advance.

    Sincerely yours

  •  06-01-2013, 18:26 594430 in reply to 594423

    Re: AW: Re: AW: Re: AW: Re: Pinnacle Liquid Edition 6.1

    Try sending an email or private message to Raff and see if he can help you. I believe he has access to the registration database. Good luck.




View as RSS news feed in XML
Copyright © 2012 Corel, Inc.. Terms of Use | Privacy Policy